Transfer Rate
  The Transfer Rate is the rate by which magicVORTEX communicates with the Relay to discover new information and transfer data packets. Ten (10) is the fastest rate (the right-most position of the slider control) and one (1) is the slowest (the left-most position of the slider control). By lowering the Transfer Rate, a user can save more bandwidth for other uses and still transfer files at the same time.
 
  Determining the current Transfer Rate
 
Transfer Rate Control
(Radar Console)
  In Radar Console mode, a Transfer Rate slider control (pictured above) is located directly on the main console. The slider's current position is equal to the current Transfer Rate. In addition, this slider control can be used to set the Transfer Rate (see below for details).
 
Transfer Rate Indicator
(Grid Console)
  In Grid Console mode, the value of the current Transfer Rate can be determined by using the Transfer Rate Indicator (pictured above) which is located in the status bar portion of the Grid Console. In addition, double-clicking the indicator will display the Settings Dialog, so that the Transfer Rate can be modified.
 
  Setting the Transfer Rate
  In Radar Console mode:
  1. On the Radar Console, press the Menu button
  2. On the Menu Dialog, press the Settings button
  3. On the Settings Dialog, select the Advanced tab
  4. Move the position of the Default Transfer Rate slider (pictured below) to the left (slower) or to the right (faster)
  5. Press the OK button to save the new Transfer Rate
  In Grid Console mode:
  1. On the Grid Console, press the toolbar button
  2. On the Settings Dialog, select the Advanced tab
  3. Move the position of the Default Transfer Rate slider (pictured below) to the left (slower) or to the right (faster)
  4. Press the OK button to save the new Transfer Rate
 
  Note: When the Transfer Rate is changed, the new rate will be used the next time the application launches.
 
  Setting the Transfer Rate (Radar Console only)
(Alternate Method)
 
Transfer Rate Control
  In Radar Console mode (only), a user can change the current Transfer Rate by changing the position of the slider control which is located directly on the main console.
 
See also:
  Pause All Transfers / Resume All Transfers
  Relay (definition)
  Settings Dialog (Advanced)
  Transfer Rate (definition)